Rex has supplied forklift and crane attachments across New Zealand since 1946, from slip-on fork extensions, jibs and pallet hooks that turn a standard forklift into a reach or lifting tool, through to spreader beams, goods cages, tipping bins and concrete kibbles for crane and overhead lifting. The range covers forklift-mounted attachments, telescopic jibs, self-dumping and drop-bottom bins, concrete handling gear, and lifting cages and beams rated well into the tonnes.
Not sure whether you need a forklift-mounted attachment or a crane-lifted one, and what your machine can safely carry? The guidance below covers the types and how to match one to your forklift or crane, or browse the full range and subcategories.
Forklift-mounted attachments slip onto or bolt to the forks or carriage so one machine does more: extension slippers reach under long loads, jibs let a forklift lift and place like a crane, pallet hooks pick up hanging loads, and bin tippers and rotators empty bins over a skip. Every forklift attachment adds weight and pushes the load further from the mast, so it lowers the truck’s safe capacity, and you always work to the derated figure on the attachment plate rather than the forklift’s bare rating. Crane-lifted attachments hang from a hook or overhead crane instead: spreader beams share the load across two or more points so long or flexible loads stay level, goods and pallet cages lift loose stock and pallets safely, personnel cages lift people to height where the job calls for it, and concrete kibbles and drop-bottom bins carry and place concrete or bulk material. As a rule, if the load already sits on a forklift, a forklift attachment extends what it can do, and if it needs lifting from above or placing precisely, a crane attachment and beam is the safer route.
Forklift-mounted attachments
Jibs and reach attachments
Tipping and dumping bins
Concrete handling
Crane cages, bins and beams
Four things decide the right attachment: the machine, its safe capacity, the fitting and the load. For a forklift-mounted attachment, start with the truck’s data plate, then subtract the attachment’s own weight and allow for the load sitting further forward, because both cut the safe capacity, so work to the derated figure and never the bare rating. Check the carriage and fork dimensions too, as slip-on extensions and pallet hooks have to fit the forks you run. For a crane attachment, the crane or hoist safe working load is only half the story: the spreader beam, cage or kibble carries its own rated capacity, so match that to the load as well. Then match the type to the job, so extensions and jibs for reach, beams for long or flexible loads, cages for loose stock or people, and tipping and drop-bottom bins for waste, bulk and concrete.
Tell us your forklift make, model and rated capacity, or your crane’s safe working load, plus the load you’re lifting and where, and we’ll match you to the right attachment or size a spreader beam or cage to suit. Call your nearest Rex store or get in touch through our contact page, and ask about bulk and trade pricing if you’re fitting out a fleet or a site.
Forklift attachments slip onto or bolt to the forks or carriage so the truck can reach, lift, tip or hook a load it otherwise couldn’t. Crane attachments hang from a hook or overhead crane instead, and cover spreader beams, goods and personnel cages, kibbles and drop-bottom bins for lifting from above. If the load already sits on a forklift, a forklift attachment extends what it does; if it needs lifting or placing from overhead, a crane attachment is the route.
Yes. Any attachment adds weight and usually moves the load further from the mast, so the truck’s safe capacity drops. Work to the derated capacity shown on the attachment or forklift data plate rather than the forklift’s bare rating, and if you’re unsure, send us the forklift details and we’ll help you check.
A forklift jib is a fixed arm that slips over the forks and puts a lifting hook out in front, so the forklift can lift and place like a crane. A telescopic jib extends and retracts to change its reach, and some models tilt, which suits placing loads over an obstacle or into a fixed position where a fixed jib can’t reach.
A spreader beam hangs under a crane hook and spreads the lift across two or more points, so long, wide or flexible loads stay level and the slings pull straight down rather than inwards. The Rex range runs up to 10 tonnes, with adjustable and fixed beams, so match the beam’s rated capacity to the load as well as the crane’s safe working load.
A goods cage lifts loose stock, pallets or an IBC safely under a crane or on forks, so nothing can fall out during the lift. A personnel cage is built to lift people to height, so it is a different product with its own safety requirements. Tell us the job and we’ll point you to the right cage and what’s needed to use it safely.
A concrete kibble carries wet concrete under a crane or forklift and pours it through a bottom gate or chute where a truck or pump can’t reach. Manual kibbles are opened by a lever, while hydraulic kibbles let the operator control the pour from the machine, which suits higher or awkward pours.
We can offer bulk and trade pricing on select ranges and products, depending on the item and the quantity. Tell us what you need and how many through our contact page, and we’ll let you know how we can help with your specific requirements.
Lifting from ground level rather than a forklift or crane? See our material lifting and transport range for stackers, lift tables and material lifters. To move loads around the site, browse hand trucks and trolleys, or store what you’ve lifted with our racking, storage and site equipment.